Metal Cut Coldsaw Checklist

Coldsaw ID

Prior to commencement ensure the saw is inspected and is free from damages/defects.

Yes
No

If there are any damages to the equipment, do not operate. Report to Supervisor and remove from service until it has been repaired or replaced.

Yes
No

Familiarise yourself with the machine and controls (i.e. emergency stop). Make sure you understand the use and operation of all controls.

Yes
No

On a daily basis you should; make a general cleaning by removing dust and shavings from the machine; top off the coolant; inspect the disc/saw blade for wear; raise the head into a higher position to reduce stress on the return spring; and check the shield and emergency stops are in good working order.

Yes
No

Ensure the machine is in “E-Stop” mode.

Yes
No

Clean area around the machine to remove materials and debris, ensuring clear access and egress for a forklift to load and unload items.

Yes
No

Ensure roller bench is unobstructed and in good working condition.

Yes
No

Check guarding is installed correctly.

Yes
No

Ensure the work area is isolated to prevent unauthorised personnel from making contact with the machine.

Yes
No

Never operate the saw that has damaged or worn parts. Scheduled routine maintenance should be performed on a scheduled basis.

Yes
No

Comments

Who is completing the checklist?